ASI 3451 Stainless Steel Swing-Up Grab Bar 1-1/4 in. O.D. Exposed Mounting

Product ID 3451
Picture may not match selected options
Configure Product
Price ranges from $372.80 to $430.40 depending on options chosen below:
Price with selected options:Choose option(s) to show price

Swing-Up Grab Bar shall be fabricated of alloy 18-8 stainless steel type 304.
Grab bar tubing shall be 18 gauge 1-1/4" diameter [Ø32].
Mounting bracket shall be 7 gauge (3/16" [5] thick) plate with six (6) 5/16" diameter [Ø8] mounting holes provided and shall have 1-1/4" diameter [Ø32] x 3/16" [5] wall tubing hinge riding on solid bar axle with twin torsion-spring counter balance.
All exposed surfaces shall be satin finish. Structure shall be of welded construction. All exposed edges and corners shall be eased and burr free.
Vertical position gravity lock with manual release shall be provided.
Tamper resistant set screw shall be provided to allow owner to lock grab bar in vertical position.
Internal mechanisms shall be captive and suitable for heavy duty service.
Grab bar shall be operable with only one hand.
Grab bar tube shall have a plastic end cap to cushion contact with wall plate in use position.

WARNING:This product can expose you to chemicals which are known to the State of California to cause cancer, to cause birth defects or other reproductive harm. Wash your hands after installing for uninstalling this product. For more information, go

The following part numbers are available by selecting the options above.


Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.